01296 846982
700W professional DMX vertical Fog Machine with 12x 3-Watt LEDs
High performance pump for optimum output
ADJ’s Electronic Thermo Sensing (ETS) technology
Special heating element design that uses an oil type transmission pipeline system to minimize the possibility clogging
3 Operational modes: Manual, Remote Control, or DMX Controlled
5 DMX Channels, 1, 2, 3 5 or 7 ch
4-button control panel & LCD display on rear panel
3-pin DMX XLR In/Out connections
Convenient carrying handle
Low Fluid Indicator on rear
Warm-up time: 9 min
External fog fluid tank: 3 Liter
Fog Output: 20,000 (cu.ft/min)
Fluid Consumption: 120 ml/min
Tank can be mounted to either front or rear so that the effect may be pointed up or down
Power Connection: IEC AC In
Safety Loop on board
Only use high quality, water-based fog fluid
Light Source: 12x 3-Watt LEDs, (3 Red, 3 Green, 3 Blue & 3 Amber LEDs)
Heater: 700W
Voltage: AC 120V, 230 or 240 50/60Hz (non switching)
Power Consumption: 730W (Full on)
Dimensions (LxWxH): 15.5” x 12” x 7.5” / 397 x 302 x 191mm
Weight: 16 lbs. / 7.1 kg.
Specification
Hire
ADJ Fog Fury Jett
Options
Description
The ADJ Fog Fury Jett is a high velocity vertical Fog Machine that mixes color into the fog from 12x 3-Watt RGBA LEDs. With new advances in ADJ’s heater technology, the Fog Fury Jett produces a dry even blast of fog over 25 feet (7 meters) in the air. It has a special heating element design that uses an oil type transmission throughout the pipeline to prevent clogging. It is also equipped with a high performance Italian pump system for optimum output. ADJ’s Electronic Thermo Sensing (ETS) technology is on-board to maintain optimum heat levels with short warm-up time between fog blasts.
The Fog Fury Jett may be use vertically or horizontally. The reservoir tank may be mounted in the front or rear of the unit so the machine may be pointed up or down.